🎮 ECO Smart Display Navigation
Flexi ACiON - Complete Navigation & Menu Guide
Keyboard Functions
🎯 Overview:
The ECO Smart Display uses 5 keys to navigate menus and adjust parameters. Learn each key's function below.
KEY 1
UP / ROLL
• Scroll UP through menus
• Roll between parameters
• Navigate to previous item
• Roll between parameters
• Navigate to previous item
KEY 2
OUT / DECREASE
• EXIT current menu
• DECREASE parameter value
• Exit without saving (in some menus)
• DECREASE parameter value
• Exit without saving (in some menus)
KEY 3
ENTER / SELECT
• ENTER selected menu
• CONFIRM selection
• EXIT and SAVE changes
• CONFIRM selection
• EXIT and SAVE changes
KEY 4
SHIFT / INCREASE
• INCREASE parameter value
• Shift to next option
• Modify settings upward
• Shift to next option
• Modify settings upward
KEY 5
DOWN / ROLL
• Scroll DOWN through menus
• Roll between parameters
• Navigate to next item
• Roll between parameters
• Navigate to next item
⚠️ IMPORTANT:
Key 3 (Enter) is used for both entering menus AND saving changes. Key 2 (Out) exits menus and can discard changes.
💡 Quick Reference:
- Navigation: Keys 1 & 5 (Up/Down)
- Selection: Key 3 (Enter)
- Value Adjustment: Keys 2 & 4 (Out/Shift)
- Exit: Key 2 (Out) or Key 3 (with save)
Inverter Nodes (CAN Bus)
🔗 Connection:
After accessing ZAPI CONSOLE from the SERVICE MENU, you can connect to individual inverters on the CAN bus network. Each inverter controls different truck functions.
DISP EDZ NRx.xx
ECO Smart Display itself - Display configuration and settings
DISPLAY
A3MT2C 2NNRx.xx
Traction inverter - Controls drive motor, forward/reverse, speed control
TRACTION
A3ST2C 2NNRx.xx
Traction Slave - Used to check alarms of the slave processor only
TRACTION SLAVE
AE2PSB H NRx.xx
Pump inverter - Controls main lift hydraulic pump, lift/lower functions
PUMP (LIFT)
AC0T2BE NRx.xx
Pump inverter - Controls steering hydraulic pump, steer motor
PUMP (STEER)
📝 Note:
The x.xx
in each inverter name represents the software version level. This will vary depending on the installed firmware.
Connecting to Inverters
Access SERVICE MENU with password
→
Select ZAPI CONSOLE
Use Keys 1 & 5 to scroll nodes
→
Press Key 3 to connect
Display shows connected node
→
Navigate menus as console
✓ Once Connected:
The display functions exactly like a ZAPI digital console. You can access all parameters, diagnostics, and programming functions for that specific inverter.
Menu Structure & Navigation
📊 Menu Overview:
Once connected to an inverter, you can navigate through different menu categories. The main screen provides access to all functions.
📱 MAIN SCREEN (Connected Inverter)
Press ENTER (Key 3)
to access:
📋 PARAMETERS - View and modify parameters
⚙️ SET OPTIONS - Configure operational settings
🔧 ADJUSTMENTS - Fine-tune system adjustments
Press UP (Key 1)
to access:
📊 DIAGNOSTICS - System diagnostics and troubleshooting
⚠️ ALARMS - View active and historical alarms
🔍 MONITORING - Real-time system monitoring
Press OUT (Key 2)
to:
↩️ Return to MAIN SCREEN
🚪 Exit current menu level
🔴 Navigation Rules:
- ENTER (Key 3)- Go deeper into menus
- OUT (Key 2)- Go back to previous level
- UP/DOWN (Keys 1 & 5)- Navigate between menu items
Parameter Menu Guide
⚠️ Important:
This procedure applies to PARAMETERS, SET OPTIONS, and ADJUSTMENTS menus. All three use the same navigation method.
Step-by-Step Parameter Editing
1
Access Parameter Menu
Press KEY 3 (Enter) to access the Parameter menu
Press KEY 3 (Enter) to access the Parameter menu
2
View First Parameter
Display shows the first parameter in the list with current value
Display shows the first parameter in the list with current value
Parameter Name: XXX
Current Value: YYY
Current Value: YYY
3
Navigate Through Parameters
Use KEY 1 (Up) and KEY 5 (Down) to scroll through the parameter list
Use KEY 1 (Up) and KEY 5 (Down) to scroll through the parameter list
4
Adjust Parameter Value
Use KEY 2 (Out) to DECREASE value
Use KEY 4 (Shift) to INCREASE value
Use KEY 2 (Out) to DECREASE value
Use KEY 4 (Shift) to INCREASE value
💡 Tip:
Watch the display as values change in real-time
5
Exit Parameter Menu
Once finished, press KEY 3 (Enter) to exit the parameter menu
Once finished, press KEY 3 (Enter) to exit the parameter menu
6
Save or Discard Changes
You'll be prompted to save changes:
You'll be prompted to save changes:
- Press KEY 3 (Enter) to EXIT & SAVE Changes
- Press KEY 2 (Out) to EXIT & IGNORE Changes
🔴 CRITICAL WARNING:
Changes are NOT automatically saved! You MUST press Enter (Key 3) when prompted to save your parameter changes. Pressing Out (Key 2) will discard all changes made in that session.
Quick Parameter Change Flow
Enter Menu (Key 3)
→
Scroll to Parameter (Keys 1/5)
Adjust Value (Keys 2/4)
→
Exit (Key 3)
Save (Key 3) or Discard (Key 2)
→
Complete!
📝 Remember:
- Keys 1 & 5- Navigate between parameters
- Keys 2 & 4- Decrease/Increase values
- Key 3- Enter menus and SAVE changes
- Key 2- Exit and potentially DISCARD changes
Flexi ACiON ECO Smart Display - Navigation Guide
© 2024 Technical Documentation