🔌 H2B Contactors Specifications
Technical Data Sheet - Forward/Reverse & Regenerative Contactors
48V DC System Components
📋 About:
Complete technical specifications for H2B system contactors. All measurements taken at 20°C ambient temperature. These contactors are specifically designed for ZAPIMOS H2B chopper applications.
⚡
S2202-258T FWD.-REV.
Forward/Reverse Contactor
⚙️ Electrical Specifications
| Coil Voltage (V) | 48 PO DC |
| Coil Resistance (Ω) | 94 Ω |
| Pull-in Voltage (V) | 30.0 V Maximum |
| Drop-out Voltage (V) | 12.0 V Maximum |
| Coil Power Dissipation (W) | 24.51 W |
🔧 Additional Features
- ENCLOSED TOP COVERS FITTED
- NO BRACKET FITTED
- +VE AT FRONT, CRANKED LINKS AT BACK (-VE SIDE)
- LONG NORMALLY CLOSED CONTACT ON RIGHT HAND SIDE
- TEXTURED TIPS THROUGHOUT
⚠️ NOTE:
All figures stated at 20°C ambient temperature. Performance may vary outside this temperature range.
🔄
SW201-249T Re-Gen.
Regenerative Braking Contactor
⚙️ Electrical Specifications
| Coil Voltage (V) | 48 PO DC |
| Coil Resistance (Ω) | 80 Ω |
| Pull-in Voltage (V) | 30.0 V Maximum |
| Drop-out Voltage (V) | 12.0 V Maximum |
| Coil Power Dissipation (W) | 28.80 W |
🔧 Additional Features
- TEXTURED CONTACTS THROUGHOUT
- ENCLOSED TOP COVER FITTED - T/C TO BE REVERSED (+VE ON LHS)
- CRANK LINK FITTED ON RIGHT HAND SIDE (-VE SIDE)
- -VE N/C FIXED CONTACT WITH CRANKED LINK POSITIONED ON FRONT
- +VE N/C FIXED CONTACT POSITIONED AT REAR
⚠️ NOTE:
All figures stated at 20°C ambient temperature. Performance may vary outside this temperature range.
📊 Quick Comparison
| Specification | S2202-258T (FWD-REV) | SW201-249T (Re-Gen) |
| Coil Resistance | 94 Ω | 80 Ω |
| Power Dissipation | 24.51 W | 28.80 W |
| Application | Forward/Reverse Direction Control | Regenerative Braking Control |
| Contact Configuration | Long N/C on RHS | N/C Front & Rear |
💡 Installation Tips:
- Verify voltage polarity before installation
- Ensure proper contact alignment and positioning
- Check for correct orientation of cranked links
- Confirm top cover is properly enclosed
- Coil current must not exceed 3A for H2B chopper compatibility
H2B Contactors Technical Specifications
ZAPIMOS H2B Compatible Components
48V DC System - Forward/Reverse & Regenerative
© 2024 Technical Documentation