AC0 Alarm Codes - Steer
| AC0 ALARM CODES | ||
|---|---|---|
| A8 | ON STEER | WATCHDOG |
| A13 | ON STEER | EEPROM KO |
| A15 | ON STEER | LOGIC FAILURE #5 |
| A17 | ON STEER | LOGIC FAILURE #3 |
| A18 | ON STEER | LOGIC FAILURE #2 |
| A19 | ON STEER | LOGIC FAILURE #1 |
| A30 | ON STEER | VMN LOW |
| A31 | ON STEER | VMN HIGH |
| A49 | ON STEER | I=0 EVER |
| A53 | ON STEER | STANDBY I HIGH |
| A60 | ON STEER | CAPACITOR CHARGE |
| A61 | ON STEER | HIGH TEMPERATURE |
| A65 | ON STEER | MOTOR TEMPERATURE |
| A66 | ON STEER | BATTERY LOW |
| A69 | ON STEER | CURRENT SENS KO |
| A74 | ON STEER | DRIVER SHORTED |
| A75 | ON STEER | CONTACTOR DRIVER |
| A76 | ON STEER | COIL SHORTED |
| A78 | ON STEER | VACC NOT OK |
| A79 | ON STEER | INCORRECT START |
| A80 | ON STEER | FORWARD & BACK |
| A96 | ON STEER | PEDAL WIRE KO |
| A99 | ON STEER | INPUT ERROR #1 |
| A232 | ON STEER | STALL ROTOR |
| A234 | ON STEER | EPS RELE OPEN |
| A235 | ON STEER | CAN BUS KO EPS |
| A236 | ON STEER | WRONG SET BAT |
| A237 | ON STEER | SLIP PROFILE |
| A240 | ON STEER | WRONG CONFIG |
| A247 | ON STEER | PEV NOT OK |
| A248 | ON STEER | CAN BUS KO |
| A249 | ON STEER | CHECK UP NEEDED |
| A250 | ON STEER | THERMIC SENS KO |
| A251 | ON STEER | HANDBRAKE |
| A252 | ON STEER | WAITING FOR NODE |
| A253 | ON STEER | ENCODER EORROR |
| A254 | ON STEER | AUX OUTPUT KO |